2017, Volume 19, Issue 6
Strategic Study of CAE >> 2017, Volume 19, Issue 6 doi: 10.15302/J-SSCAE-2017.06.019
Waterproofing Technology for Underground Fabricated Structure Joints Based on the Open Cut Method
1. School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China
2. Beijing Municipal Construction Co., Ltd. Third Agency, Beijing 100176, China
Next Previous
Abstract
Compared with traditional cast-in-place structures, fabricated structures have the characteristics of saving energy, protecting the environment, eliminating mold, and short construction times. Fabricated structures have been developed rapidly in above-ground buildings. However, the use of underground fabricated structures in China has only recently begun. Owing to the complexity of the underground environment, waterproofing underground fabricated structure joints remains a problem. In this paper, based on an analysis of the joints of an underground fabricated building and of the current state of waterproofing technology, we propose the use of an epoxy grouting material, which is used to pot the prefabricated structure joint, and study the mechanical properties of the epoxy grouting material and its bonded concrete. At the same time, we introduce backfilling technology for prefabricated solidified soil in the foundation pit, and expound the effect of the prefabricated solidified soil on the waterproofing of the underground engineering structures. The research results are good references for similar engineering projects.
Keywords
prefabricated structures ; underground structure joint ; epoxy grouting material ; prefabricated solidified soil ; waterproofing technology
Figures
Fig.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
References
[ 1 ] Zhou J M. Design form and applicability analysis for deformation seam and joint of municipal tunnel [J]. Special Structures, 2016, 33(2): 60–65. Chinese. link1
[ 2 ] Ye J. Performance analysis of joints in prefabricated concrete structures [J]. Technology Wind, 2015 (15): 155. Chinese.
[ 3 ] Wang M N, Li Z Y, Wei L H. Prefabrication of tunnels and subway [M]. Chengdu: Southwest Jiaotong University Press, 2009.
[ 4 ] Zhang C, Xu J. Construction technology for joint treatment of prefabricated building [J]. Bulding Constrction, 2017, 39(6): 807–809. Chinese.
[ 5 ] Fan H, Wang L. Waterproof technology of precast concrete build-ings [J]. Housing Science, 2016 (3): 20–23. Chinese.
[ 6 ] You M, Cao P, Wei X H, et al. Effect of SiO2 filler on the elastic modulus and Poisson’s ratio of epoxy layer [J]. China Adhesives, 2006, 15(3): 12–14. Chinese. link1
[ 7 ] Yuan J Y, Pan C Y. The essence and removing methods of internal stress due to volume shrinkage during kesin curing period [J]. Chemistry and Adhesion, 1998(4): 234–240. Chinese. link1
[ 8 ] Li X D, Chen M C, Huang Y H. Plastic toughened by rigid filler [J]. Guangzhou Chemistry, 1996(3): 7–14. Chinese. link1
京公网安备 11010502051620号
