[ 1 ] Spearpoint J M.Predicting the Ignition and Burning Rate of Wood in the Cone Calorimeter Using an Integral Model [ M] .Baltimore: University of Maryland,1999

[ 2 ] Delichatsios M A. Ignition time for the thermally thick and intermediate conditions in flat and cylindrical geometries[ J] .Fire Science and Technology Laboratory, 1995 , 102 ( 3 ) : 2s33 ~244

[ 3 ] Hopkins D Jr, Quintiere J G. Material fire properties and predictions for thermoplastics [ J] .Fire Safety Journal, 1996 , 26 ( 3 ) :241 ~268 link1

[ 4 ] Huggett C.Estimation of rate of heat release by means of oxygen con- sumption measurements [J].Fire and Materials, 1980, 4:61 ~65 link1

[ 5 ] 杨惠娣,赵红玉,蒋震宇.聚合物科学入门[M].北京:北京轻工业出版社,1986

[ 6 ] 钟世云,许乾慰,王公善.聚合物降解与稳定化[M].北京:北京化学工业出版社,2002

[ 7 ] Delichatsios M A, Panagiotou T H, Kiley F.The use of time to ig- nition data for characterizing the thermal inertia and the minimum ( critical) heat flux for ignition or pyrolysis[ J] .Combustion and Flame 1991 , 84 :323 ~332 link1

[ 8 ] Mikkola E,Wicchman I S.On the thermal ignition of combustible materials.[ J] Fire and Materials, 1989 ,14 ( 3 ) :87 ~96 link1

[ 9 ] Quintiere J G,Rhodes B T.Fire growth models for materials[D].De- partment of Fire Protection Engineering University of Maryland, 1994

[10] Thomson H E, Drysdale D D.Flammability of plastics I: ignition temperatures [ J] .Fire and Materials, 1987 ,11 ( 4 ) :163 ~172 link1

[11] Silcock G W H, Shields T J.A Protocol for analysis of time to ig- nition data from bench scale tests[ J] .Fire Safety Journal, 1995 , 24 ( 1 ) :75 ~95 link1