2008, Volume 10, Issue 10
Strategic Study of CAE >> 2008, Volume 10, Issue 10
Equivalent linearization method based on assessment area in the analysis-design of pressure vessels
Institute of Systems Engineering, CAEP, Mianyang, Sichuan 621900, China
Next Previous
Abstract
Based on the analytical solutions of a spherical pressure vessel subjected to internal pressure, it points out that the results of membrane stress and bending stress are inaccurate obtained by the one-dimension integral along a line called assessment line in the direction of shell thickness recommended by some references and standards. Therefore, a more accurate method is presented in which the resorted stresses are obtained through two-dimension integral over a ring cross-section area called assessment area of the shell. As an example, an analysis based on the elastic analytical solutions of a thick-walled spherical shell bearing internal pressure shows that the method suggested by this paper can make analysis and design of pressure vessels more accurate.
Figures
图1
References
[ 1 ] 李建国.压力容器设计的力学基础及其标准应用[M].北京:机械工业出版社,2004
[ 2 ] 丁伯民.美国压力容器规范分析-ASMEⅧ–1和ASMEⅧ–2[M].上海:华东理工大学出版社,1995
[ 3 ] 钢制压力容器———分析设计标准[S].JB4732–95
[ 4 ] 龚曙光,谢桂兰.压力容器分析设计中的应力分类方法[J].化工装备技术,2000,21(3):27-31 link1
[ 5 ] 沈迅伟,李永生,陈建俊.筒体大开孔结构的应力分析[J].化工机械,1992,(2):17-22
京公网安备 11010502051620号
