2013, Volume 15, Issue 1
Strategic Study of CAE >> 2013, Volume 15, Issue 1
Study on dynamics of rotary swaging machine driven by servo motor
School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Next Previous
Abstract
In this paper, the servo motor driven swaging machine was designed; profile of striker was derived from cycloidal motion curve and its motion features were analyzed. The maximum load of swaging machine was calculated by upper bound method. According to the calculation, the maximum load of swaging machine decreased with die angle increasing, but on the other hand, the push force on perform increased. The compromised die angle in the field was 5°~ 15°.
Keywords
Figures
图1
图2
图3
图4
图5
图6
图7
References
[ 1 ] 方树铭，雷 霆，张玉林，等．旋锻法加工低塑性有色金属异型 材的应用研究 [J] . 锻压技术，2007，32（5）：69-72. link1
[ 2 ] 赵升吨，张玉亭. 旋锻技术的研究现状及其应用[J]. 锻压装备与 制造技术，2010（2）：16-20. link1
[ 3 ] 中国机械工程学会锻压学会．锻压手册：第3卷[M]．3版．北 京：机械工业出版社，2008：524-527.
[ 4 ] Patnude F，Warwick R L. Rotary swaging machine：US，2433152 [P].1947-12-23.
[ 5 ] Osakada K，Mori K，Altan T，et al. Mechanical servopress technology for metal forming [J]. CIRP Annals - Manufacturing Technology，2011，60（2）：651-672. link1
[ 6 ] 李 尧. 金属塑性成形原理[M]. 北京：机械工业出版社，2004： 218-219.
[ 7 ] Sanjari M，Karimi Taheri A，Ghaei A. Prediction of neutral plane and effects of the process parameters in radial forging using an upper bound solution [J]. Journal of Materials Processing Technology，2007，186：147-153. link1
[ 8 ] Ghaei A，Movahhedy M R，Taheri A K. Study of the effects of die geometry on deformation in the radial forging process [J]. Journal of Materials Processing Technology，2005，170（1-2）：156-163. link1
[ 9 ] Bourkine S P，Babailov N A，Loginov Y N，et al. Energy analysis of a through-put radial forging machine [J]. Journal of Materials Processing Technology，1999，86：291-299. link1
京公网安备 11010502051620号
