Journal Home Online First Current Issue Archive For Authors Journal Information 中文版

Strategic Study of CAE >> 2015, Volume 17, Issue 1

Research development of filling mining technique and technical problems to solve in Jinchuan Nickel Mine with high stress

Key Laboratory of High Efficient Mining and Safety of Metal Mines of Ministry of Education, University of Science and Technology, Beijing 100083, China

Funding project:国家重点基础研究发展计划(2010CB731500) Received: 2013-12-30 Available online: 2015-01-13 10:39:05.000

Next Previous

Abstract

Jinchuan Nickel Mine is one of the large copper sulfide nickel deposit in world. Because the buried depth of the ore is larger,the ground stress is higher and the stability of the ore and rock masses is poorer,it is one of the most difficult deposits to mining in the world. According to the mining technical conditions of Jinchuan deposit,a lot of researches have been carried out since the mine was built. At first,this paper provides a brief overview on engineering general situation of Jinchuan mine,then summarizes the filling mining development in Jinchuan mine. On this basis,it further expounds the research results of filling technology obtained in Jinchuan mine. Based on a large number of research on engineering geology and mining method test,the downward layered cemented filling mining method was used. Research development on filling mechanism,multipurpose use of solid waste,filling slurry rheological properties and pipe reduction conveying etc. had been obtained. Especially the paste filling technology that was the first time to be used in our country,was studied and filling system was reformed, the paste filling had reached design production capacity smoothly. Finally it points out the current situation and existing main problems in filling mine and puts forward key technical problems to solve in order to realize the safe,efficient,economic and environmental mining in Jinchuan Nickel Mine.

References

[ 1 ] 杨志强,高 谦,王玉山,等. 特大型镍矿工程地质与岩石力学 [M]. 北京:科学出版社,2013.

[ 2 ] 王正辉,高 谦. 胶结充填采矿法充填作用机理与稳定性研究 [J].金属矿山,2003(10):18-20. link1

[ 3 ] 王正辉.充填体的质量与控制[J].采矿技术,2001(3):16-18. link1

[ 4 ] 王佩勋,王正辉.胶结充填体质量问题探析[C]//第八届国际充填 采矿会议论文集. 2004:205-208. link1

[ 5 ] 王新民,史良贵,肖智政,等.减水剂在充填料浆中的作用机理 及应用研究[J].金属矿山,2004(4):11-13. link1

[ 6 ] 张海军,陈怀利,梁艇栋,等.提高胶结充填体早期强度的试验 研究[J].金属矿山,2009(增1):284-286. link1

[ 7 ] 顾贵先.粉煤灰在金川矿山胶结充填中的应用[J].有色矿山, 1994(4):15-16. link1

[ 8 ] 孙三壮,梅维岑,黄顺利,等.金川二矿区井下废石料充填利用 及充填体受力状态分析[J].矿冶工程,1997(1):1-4. link1

[ 9 ] 王小卫. 影响金川矿山细砂胶结充填体质量的因素分析[J].铀 矿冶,1999(1):32-36.

[10] 刘同有,韩 斌,王小卫.镍闪速炉水淬渣胶结充填配合比优 化选择与分析[J].中国矿业,2000(6):19-22. link1

[11] 刘同有,周成浦. 金川镍矿充填采矿技术的发展[J]. 中国矿业, 1999,8(4):1-4. link1

[12] 杨长祥,辜大志,张海军,等.镍矿资源深部开采面临的技术问 题及对策[J].采矿技术,2008(4):34-36. link1

[13] 刘同有.充填采矿技术与应用[M].北京:冶金工业出版社, 2001.

[14] 吴统顺,朱毓新,叶粤文,等.龙首矿下向高进路采场胶结充填 体的力学机理研究[J]. 长沙矿山研究院季刊,1985,2(1):10- 18. link1

[15] 周自昌,贺发运.降低金川二矿区充填成本的途径[J].西部探矿 工程,2002(2):68-69. link1

[16] 党明智,田 维,莫亚斌.高浓度尾砂胶结充填在金川二矿区 的应用[C]//第八届国际充填采矿会议论文集. 2004:73-75. link1

[17] 王正辉,张丰田,莫亚斌.尾砂充填料浆的配合比试验研究[J]. 矿业研究与开发,2006,26(1):11-13. link1

[18] 张海军,李 英,赵永贤.粉煤灰替代部分水泥的膏体充填技 术[J].有色金属(矿山部分),2009(3):1-2. link1

[19] 王正辉.胶结充填中粉煤灰替代水泥的比例研究[J].采矿技术, 2010(3):43-45. link1

[20] 苑雪超,乔登攀.金川二矿废石胶结充填料浆搅拌方式的研究 [J].有色金属(矿山部分),2010(4):6-10. link1

[21] 王爵鹤,姜渭中,周成浦.高浓度胶结充填料管道水力输送[J]. 长沙矿山研究院季刊,1981(1):10-23. link1

[22] 李建军.充填料对镍可浮性的影响及消除[J].有色矿山,1990 (3):28-32. link1

[23] 刘同有,金铭良,周成浦.金川高浓度充填料浆管道自溜输送 新工艺[J].中国矿业,1998(1):31-38. link1

[24] 王新民,肖卫国,王小卫,等. 金川全尾砂膏体充填料浆流变特 性研究[J]. 矿冶工程,2002,22(3):13-16. link1

[25] 王佩勋.矿山充填料浆水力坡度计算[J].有色矿山,2003(1):8- 11. link1

[26] 贺发运.金川公司二矿区流体和细粒散体钻孔输送技术[J].采 矿技术,2006(3):205-206. link1

[27] 陈忠平,翟淑花,高 谦.泡沫砂浆充填体力学特性及其应用 研究[J].金属矿山,2010(8):7-10. link1

[28] 翟淑花,高 谦,张梅花,等.高强轻质泡沫砂浆充填体在矿山 的应用研究[J].化工矿物与加工,2010(12):30-34. link1

[29] 王佩勋,王五松.膏体泵送充填工艺试验研究与应用[C]//第六 届全国采矿学术会议论文集.1999:412-416. link1

[30] 方理刚.膏体泵送特性及减阻试验[J].中国有色金属学报,2001 (4):676-679. link1

[31] 陈长杰,蔡嗣经.金川二矿区膏体充填系统试运行有关问题的 探讨[J].矿业研究与开发,2001(3):21-23. link1

[32] 陈长杰,蔡嗣经.金川二矿膏体泵送充填系统可靠性研究[J].金 属矿山,2002(1):8-9. link1

[33] 王新民,肖卫国,王小卫,等.金川全尾砂膏体充填料浆流变特 性研究[J].矿冶工程,2002(3):13-16. link1

[34] 蔡嗣经,陈长杰.关联系统的可靠性及其在金川二矿膏体充填 系统中的应用[C]//第八届国际充填采矿会议论文集. 2004: 38-40. link1

[35] 李云武.膏体泵送充填技术在金川二矿区的试验研究及应用 [J].有色金属(矿山部分),2004(5):9-11. link1

[36] 张秀勇,乔登攀.金川二矿区胶结充填料浆可泵性影响因素分 析[J],金属矿山,2010(9):34-37. link1

[37] 梅维岑.金川矿区充填钻孔的应用经验与体会[J].有色矿山, 1993(6):11-13. link1

[38] 张鸿恩.用于充填料输送的新型耐磨钢管[J].矿业研究与开发, 1996(增1):121-123. link1

[39] 郑晶晶,张钦礼,王新民,等.基于BP 神经网络的充填钻孔使 用寿命预测[J].湘潭师范学院学报,2008 (4):40-44. link1

[40] 郑晶晶,张钦礼,王新民,等.充填管道系统失效模式与影响分 析(FMEA)及失效影响模糊评估[J].中国安全科学学报,2009 (6):166-171. link1

[41] 王贤来,郑晶晶,张钦礼,等.充填钻孔内管道磨损的影响因素 及保护措施[J].矿冶工程,2009(5):9-12. link1

[42] 刘洲基.Bredel软管泵在金川矿山充填中的工业试验[J].采矿 技术,2010(4):40-43. link1

[43] 郭三军.金川矿区破损充填钻孔永久性可修复综合技术[J].中 国矿山工程,2011(1):1-3. link1

[44] 姚维信,姚中亮,刘洲基,等.高浓度大流量管输充填技术与工 艺[M]. 北京:科学出版社,2014.

Related Research