2014, Volume 16, Issue 1
Strategic Study of CAE >> 2014, Volume 16, Issue 1
Research on dent resistance property of aluminum alloy sheets
China Automotive Engineering Research Institute Co. Ltd.，Chongqing 400039，China
Next Previous
Abstract
Researches on dent resistance property and the relationship among dent resistance， mechanical property and bake- hardening property of 6016 aluminum alloy have been carried out by means of mechanical properties test，bake- hardening property test and dent resistance test. The results indicate that after two years natural aging，the strain hardening exponent nvalue and elongation of 6016 aluminum alloy sheets increase. With 30 min baking at different temperatures，strength of the sheets increases. The bake-hardening values remarkably increase with temperature rising. The sheets exhibit good bake-hardening property. The dent resistance property is related to baking process. The higher the baking temperature is which leads to higher strength，the better the dent resistance property of the sheets will be.
Keywords
6016 aluminum alloy ; bake-hardening ; dent resistance property
Figures
图1
图2
图3
图4
图5
图6
References
[ 1 ] Daniel D，Hoffmann J L，Plassart G，et al. Optimization of 6016 aluminum alloy selection for outer panels [J]. SAE Technical Papers，2002：865-872. link1
[ 2 ] 李东升，周贤宾，吕晓东，等. 汽车板抗凹性评价体系及试验 机系统[J]. 北京航空航天大学学报. 2003，29（5）：467-470. link1
[ 3 ] 俞宁峰，汪承璞，李川海. 汽车钢板抗凹性试验方法及其应 用[J]. 锻压技术，2004（1）：51-53. link1
[ 4 ] Shih Hua-Chu，Horvath Curt D. Effects of material bending and hardening on static dent resistance [C]// SAE 2003 World Congress，Detroit，USA，2003.
[ 5 ] Peixinho N，Pinho A C M. Dent resistance of aluminium and magnesium alloys [J]. Proceedings of the Institution of Mechanical Engineers Part D：Journal of Automobile Engineering， 2006，220：1191-1198. link1
[ 6 ] Daniel J Schaeffier. Standardizing dent resistance testing through a solid partnership [J]. Body Engineering Journal，1997，25（1）： 46-48.
[ 7 ] Lu Hongzhou，Ma Mingtu，You Jianghai，et al. Dent resistance for automobile body panels [J]. Chinese Journal of Mechanical Engineering，2009，22（6）：903-911.
[ 8 ] 姚贵升. 采用烘烤硬化钢板（BH钢）改善汽车车身外表零件的 抗凹陷性能[J]. 宝钢技术，2000，4：1-7，19. link1
[ 9 ] 朱晓东，程国平，俞宁峰. 各向同性钢与烘烤硬化钢的烘烤硬 化性和抗凹陷性[J]. 钢铁研究学报，2006，18（11）：43-46. link1
[10] Society of Automotive Engineers. SAE J2575—2004 Standardized dent resistance test procedure[S]. USA：SAE International，2004.
京公网安备 11010502051620号
