Search | Engineering

订阅投稿

首页学术期刊学术焦点学术视频工程成就工程前沿联系我们 English

资源类型

期刊论文 51

年份

2023 2

2022 5

2021 4

2020 2

2019 5

2018 2

2017 3

2016 1

2014 2

2013 2

2012 1

2011 1

2010 3

2009 2

2008 3

2007 7

2004 1

2003 1

2002 1

2001 1

展开︾

关键词

柴油 2

汽油 2

FCC汽油 1

RIDOS 1

三端单片开关电源 1

乙醇 1

二冲程发动机 1

催化改质 1

催化裂解 1

光催化 1

全局优化 1

共混膜 1

内燃机 1

冷起动 1

分段线性松弛 1

发动机模拟 1

发动机设计 1

发展趋势 1

喷油策略 1

展开︾

检索范围：

排序：展示方式：

Effects of ambient temperature on regulated gaseous and particulate emissions from gasoline-, E10- and

Rencheng Zhu, Jingnan Hu, Liqiang He, Lei Zu, Xiaofeng Bao, Yitu Lai, Sheng Su

《环境科学与工程前沿（英文）》 2021年第15卷第1期 doi: 10.1007/s11783-020-1306-1

摘要： Abstract • Emissions from two sedans were tested with gasoline, E10 and M15 at 30°C and -7°C. • As the temperature decreased, the PM, PN and BC emissions increased with all fuels. • Particulate emissions with E10 and M15 were more sensitive to the temperature. • The PN and BC generated during cold start-up dominated those over the WLTC. Ambient temperature has substantial impacts on vehicle emissions, but the impacts may differ between traditional and alcohol gasolines. The objective of this study was to investigate the effects of temperature on gaseous and particulate emissions with both traditional and alcohol gasoline. Regulated gaseous, particle mass (PM), particle number (PN) and black carbon (BC) emissions from typical passenger vehicles were separately quantified with gasoline, E10 (10% ethanol and 90% gasoline by volume) and M15 (15% methanol and 85% gasoline by volume) at both 30°C and -7°C. The particulate emissions with all fuels increased significantly with decreased temperature. The PM emissions with E10 were only 48.0%–50.7% of those with gasoline at 30°C but increased to 59.2%-79.4% at -7°C. The PM emissions with M15 were comparable to those with gasoline at 30°C, but at -7°C, the average PM emissions were higher than those with gasoline. The variation trend of PN emissions was similar to that of PM emissions with changes in the fuel and temperature. At 30°C, the BC emissions were lower with E10 and M15 than with gasoline in most cases, but E10 and M15 might emit more BC than gasoline at -7°C, especially M15. The results of the transient PN and BC emission rates show that particulate emissions were dominated mainly by those emitted during the cold-start moment. Overall, the particulate emissions with E10 and M15 were more easily affected by ambient temperature, and the advantages of E10 and M15 in controlling particulate emissions declined as the ambient temperature decreased.

关键词： Particle mass Particle number Black carbon Alcohol gasoline Low temperature

HTML PDF 收藏

Study on direct alcohol/ether fuel synthesis process in bubble column slurry reactor

Zhen CHEN, Haitao ZHANG, Weiyong YING, Dingye FANG

《化学科学与工程前沿（英文）》 2010年第4卷第4期页码 461-471 doi: 10.1007/s11705-010-0517-6

摘要： The recent studies of direct alcohol/ether synthesis process in slurry reactors were reviewed, and the research work in our laboratory was carried out in this paper. a global kinetics model for direct dimethyl ether (DME) synthesis from syngas over a novel Cu-Zn-Al-Zr slurry catalyst was established according to the total of 25 experimental data, and a steady-state one-dimensional mathematical model was further developed in bubble column slurry reactor (BCSR), which was assumed that the bubble phase was plug flow, and the liquid phase was fully mixed flow. The numerical simulations of reactor design of 100000 t/a dimethyl ether pilot plant indicate that higher pressure and lower temperature were favorable to the increase of CO conversion, selectivity of dimethyl ether, product yield and height of slurry bed. The optimal operating conditions for DME synthesis process were obtained: reaction temperature at 240°C, reactor pressure at 5 MPa and reactor diameter of 2.5 m.

关键词： syngas alcohol/ether fuel slurry catalyst bubble column slurry reactor global kinetics mathematical model

HTML PDF 收藏

Molecular diffusion in ternary poly(vinyl alcohol) solutions

《化学科学与工程前沿（英文）》 2022年第16卷第6期页码 1003-1016 doi: 10.1007/s11705-021-2121-3

摘要： The diffusion kinetics of a molecular probe—rhodamine B—in ternary aqueous solutions containing poly(vinyl alcohol), glycerol, and surfactants was investigated using fluorescence correlation spectroscopy and dynamic light scattering. We show that the diffusion characteristics of rhodamine B in such complex systems is determined by a synergistic effect of molecular crowding and intermolecular interactions between chemical species. The presence of glycerol has no noticeable impact on rhodamine B diffusion at low concentration, but significantly slows down the diffusion of rhodamine B above 3.9% (w/v) due to a dominating steric inhibition effect. Furthermore, introducing surfactants (cationic/nonionic/anionic) to the system results in a decreased diffusion coefficient of the molecular probe. In solutions containing nonionic surfactant, this can be explained by an increased crowding effect. For ternary poly(vinyl alcohol) solutions containing cationic or anionic surfactant, surfactant–polymer and surfactant–rhodamine B interactions alongside the crowding effect of the molecules slow down the overall diffusivity of rhodamine B. The results advance our insight of molecular migration in a broad range of industrial complex formulations that incorporate multiple compounds, and highlight the importance of selecting the appropriate additives and surfactants in formulated products.

关键词： fluorescence correlation spectroscopy poly(vinyl alcohol) anomalous diffusion crowding effects dynamic light scattering binding effects rhodamine B

HTML PDF 收藏

Hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol on NiB/SiO2 amorphous alloy catalyst

SONG Yun, LI Wei, ZHANG Minghui, TAO Keyi

《化学科学与工程前沿（英文）》 2007年第1卷第2期页码 151-154 doi: 10.1007/s11705-007-0028-2

摘要： NiB/SiO amorphous alloy catalyst was prepared by power electroless plating method and characterized by induction coupled plasma (ICP), Brunauer Emmett Teller method (BET), transmission electron microscope (TEM) and X-ray diffraction (XRD) techniques. The catalytic performance of NiB/SiO was investigated for the hydrogenation of furfuryl alcohol (FA) to tetrahydrofurfuryl alcohol (THFA). The effects of operational conditions, such as reaction temperature, pressure, and stirring rate were carefully studied. The proper conditions were determined as the following: pressure 2.0 MPa, temperature 120?C and stirring rate 550 r/min. A typical result with FA conversion of 99% and THFA selectivity of 100% was obtained under such conditions, which was close to that over Raney Ni.

关键词： following Brunauer electroless temperature transmission

HTML PDF 收藏

Effect of decoction on CD14 expression in lipopolysaccharide signal transduction pathway of alcohol-induced

Rui ZHU MD , Lin SHEN MD , Jianguo LIU MD , Weili ZHANG MM , Ling YANG MD ,

《医学前沿（英文）》 2009年第3卷第3期页码 363-367 doi: 10.1007/s11684-009-0064-z

摘要： This paper aims to investigate the effects of (枳黄) decoction on CD14 expression in the lipopolysaccharide signal transduction pathway of alcohol-induced liver disease in rats. Seventy-five Wistar rats were randomly divided into three groups. Ethanol (56%, weight/volumn) was intragastrically administrated to 50 rats (14mL/kg body weight per day) for 10 days to establish a model of alcohol-induced liver disease, and 25 of these 50 rats were treated with decoction simultaneously. Liver injury was evaluated by biochemical examination. The plasma content of endotoxin was assayed by biochemistry. The expression of CD14 mRNA and protein in rat liver was measured by reverse transcriptional polymerase chain reaction and immunohistochemistry, respectively. decoction pretreatment significantly protected against acute alcohol-induced liver injury, which was evidenced by the decrease of elevated serum alanine aminotransferase and aspartate aminotransferase. In addition, the level of plasma endotoxin and up-regulation of CD14 was also suppressed by decoction in alcohol-intoxicated rats. decoction can significantly reduce CD14 expression in the lipopolysaccharide signal transduction pathway, which is one of the most important mechanisms of decoction to treat hepatic injury induced by alcohol in rats.

关键词： liver disease alcohol Zhihuang decoction CD14 signal transduction

HTML PDF 收藏

Using crosslinked polyvinyl alcohol polymer membrane as a separator in the microbial fuel cell

Yanping HOU, Kaiming LI, Haiping LUO, Guangli LIU, Renduo ZHANG, Bangyu QIN, Shanshan CHEN

《环境科学与工程前沿（英文）》 2014年第8卷第1期页码 137-143 doi: 10.1007/s11783-013-0534-z

摘要： Separator between anode and cathode is an essential part of the microbial fuel cell (MFC) and its property could significantly influence the system performance. In this study we used polyvinyl alcohol (PVA) polymer membrane crosslinked with sulfosuccinic acid (SSA) as a new separator for the MFC. The highest power density of 759±4 mW·m was obtained when MFC using the PVA membrane crosslinked with 15% of SSA due to its desirable proton conductivity (5.16 × 10 S·cm ). The power density significantly increased to 1106±30?mW·m with a separator-electrode-assembly configuration, which was comparable with glass fiber (1170±46?mW·m ). The coulombic efficiencies of the MFCs with crosslinked PVA membranes ranged from 36.3% to 45.7% at a fix external resistance of 1000 ?. The crosslinked PVA membrane could be a promising alternative to separator materials for constructing practical MFC system.

关键词： microbial fuel cell crosslinked polyvinyl alcohol (PVA) membrane separator material power generation coulombic efficiency

HTML PDF 收藏

Online gasoline blending with EPA Complex Model for predicting emissions

Stefan JANAQI, Mériam CHÈBRE, Guillaume PITOLLAT

《工程管理前沿（英文）》 2018年第5卷第2期页码 214-226 doi: 10.15302/J-FEM-2017022

摘要： The empirical Complex Model developed by the US Environmental Protection Agency (EPA) is used by refiners to predict the toxic emissions of reformulated gasoline with respect to gasoline properties. The difficulty in implementing this model in the blending process stems from the implicit definition of Complex Model through a series of disjunctions assembled by the EPA in the form of spreadsheets. A major breakthrough in the refinery-based Complex Model implementation occurred in 2008 and 2010 through the use of generalized disjunctive and mixed-integer nonlinear programming (MINLP). Nevertheless, the execution time of these MINLP models remains prohibitively long to control emissions with our online gasoline blender. The first objective of this study is to present a new model that decreases the execution time of our online controller. The second objective is to consider toxic thresholds as hard constraints to be verified and search for blends that verify them. Our approach introduces a new way to write the Complex Model without any binary or integer variables. Sigmoid functions are used herein to approximate step functions until the measurement precision for each blend property is reached. By knowing this level of precision, we are able to propose an extremely good and differentiable approximation of the Complex Model. Next, a differentiable objective function is introduced to penalize emission values higher than the threshold emissions. Our optimization module has been implemented and tested with real data. The execution time never exceeded 1 s, which allows the online regulation of emissions the same way as other traditional properties of blended gasoline.

关键词： emissions reformulated gasoline online control global optimization

HTML PDF 收藏

Degradation of bisphenol A by microorganisms immobilized on polyvinyl alcohol microspheres

Xue BAI, Hanchang SHI, Zhengfang YE, Qiujin SUN, Qing WANG, Zhongyou WANG

《环境科学与工程前沿（英文）》 2013年第7卷第6期页码 844-850 doi: 10.1007/s11783-013-0487-2

摘要： In this study, microorganisms (named B111) were immobilized on polyvinyl alcohol microspheres prepared by the inverse suspension crosslinked method. The biodegradation of bisphenol A (BPA) and 4-hydroxybenzaldehyde, a degradation product of BPA, by free and immobilized B111 was investigated. The BPA degradation studies were carried out at initial BPA concentrations ranging from 25 to 150 mg·L . The affinity constant K and maximum degradation rate were 98.3 mg·L and 19.7 mg·mg VSS·d for free B111, as well as 87.2 mg·L and 21.1 mg·mg VSS·d for immobilized B111, respectively. 16S rDNA gene sequence analyses confirmed that the dominant genera were and for BPA biodegradation in microorganisms B111.

关键词： bisphenol A polyvinyl alcohol immobilized microorganisms 4-hydroxybenzaldehyde

HTML PDF 收藏

Experimental study of stratified lean burn characteristics on a dual injection gasoline engine

Chun XIA, Tingyu ZHAO, Junhua FANG, Lei ZHU, Zhen HUANG

《能源前沿（英文）》 2022年第16卷第6期页码 900-915 doi: 10.1007/s11708-021-0812-6

摘要： Due to increasingly stringent fuel consumption and emission regulation, improving thermal efficiency and reducing particulate matter emissions are two main issues for next generation gasoline engine. Lean burn mode could greatly reduce pumping loss and decrease the fuel consumption of gasoline engines, although the burning rate is decreased by higher diluted intake air. In this study, dual injection stratified combustion mode is used to accelerate the burning rate of lean burn by increasing the fuel concentration near the spark plug. The effects of engine control parameters such as the excess air coefficient (Lambda), direct injection (DI) ratio, spark interval with DI, and DI timing on combustion, fuel consumption, gaseous emissions, and particulate emissions of a dual injection gasoline engine are studied. It is shown that the lean burn limit can be extended to Lambda= 1.8 with a low compression ratio of 10, while the fuel consumption can be obviously improved at Lambda= 1.4. There exists a spark window for dual injection stratified lean burn mode, in which the spark timing has a weak effect on combustion. With optimization of the control parameters, the brake specific fuel consumption (BSFC) decreases 9.05% more than that of original stoichiometric combustion with DI as 2 bar brake mean effective pressure (BMEP) at a 2000 r/min engine speed. The NO_x emissions before three-way catalyst (TWC) are 71.31% lower than that of the original engine while the particle number (PN) is 81.45% lower than the original engine. The dual injection stratified lean burn has a wide range of applications which can effectively reduce fuel consumption and particulate emissions. The BSFC reduction rate is higher than 5% and the PN reduction rate is more than 50% with the speed lower than 2400 r/min and the load lower than 5 bar.

关键词： dual injection stratified lean burn gasoline engine particulate matter emission combustion analysis

HTML PDF 收藏

Effects of ancillary ligands in acceptorless benzyl alcohol dehydrogenation mediated by phosphine-free

《化学科学与工程前沿（英文）》 2023年第17卷第3期页码 314-325 doi: 10.1007/s11705-022-2219-2

摘要： Acceptorless alcohol dehydrogenation stands out as one of the most promising strategies in hydrogen storage technologies. Among various catalytic systems for this reaction, cost-effective molecular catalysts using phosphine-free ligands have gained considerable attention. However, the central challenge for using non-precious metals is to overcome the propensity of reacting by one-electron pathway. Herein, we synthesized a phosphine-free η⁵-C₅Me₅-Co complex by using the metal–ligand cooperative strategy and compared its activity with analogous catalysts toward acceptorless alcohol dehydrogenation. The catalyst showed excellent performance with a turnover number of 130.4 and a selectivity close to 100%. The improved performance among the class of η⁵-C₅Me₅-Co complexes could be attributed to the more accessible Co center and its cooperation with the redox-active ligand. To further study the systematic structure-activity relationship, we investigated the electronic structures of η⁵-C₅Me₅-Co complexes by a set of characterizations. The results showed that the redox-active ligand has a significant influence on the η⁵-C₅Me₅-Co moiety. In the meantime, the proximal O⁻/OH group is beneficial for shuttling protons. For the catalytic cycle, two dehydrogenation scenarios were interrogated through density functional theory, and the result suggested that the outer-sphere pathway was preferred. The formation of a dihydrogen complex was the rate-determining step with a ΔG value of 16.9 kcal∙mol^‒1. The electron population demonstrated that the η⁵-C₅Me₅ ligand played a key role in stabilizing transition states during dehydrogenation steps. This work identified the roles of vital ligand components to boost catalytic performance and offered rationales for designing metal–ligand cooperative nonprecious metal complexes.

关键词： acceptorless alcohol dehydrogenation η⁵-C₅Me₅-Co metal–ligand cooperation theoretical calculation

HTML PDF 收藏

Study on extraction of thiophene from model gasoline with br?nsted acidic ionic liquids

Xiaomeng WANG, Mingjuan HAN, Hui WAN, Cao YANG, Guofeng GUAN

《化学科学与工程前沿（英文）》 2011年第5卷第1期页码 107-112 doi: 10.1007/s11705-010-0539-0

摘要： Br?nsted acidic ionic liquids (ILs), -methylimidazole hydrogen sulfate ([HMIm]HSO ) and -methylpyrrolidone hydrogen sulfate ([HNMP]HSO ), are synthesized and employed as extractants to extract thiophene from model gasoline (thiophene dissolved in -octane). The effect of extraction temperature, extraction time and volume ratio of ILs to model gasoline on desulfurization rates is investigated. Then, the optimal desulfurization conditions are obtained: the ratio of ILs to model gasoline is 1∶1, extraction temperature is 50°C for [HMIm]HSO and 60°C for [HNMP]HSO , extraction time is 60 min. Meanwhile, the desulfurization rate of [HNMP]HSO for model gasoline is 62.8%, which is higher than that of [HMIm]HSO (55.5%) under optimal conditions. The reason is discussed on the basis of the interaction energy between thiophene and ILs at the B3LYP/6-311++ G(d,p) level. Furthermore, the total desulfurization rate of [HNMP]HSO and [HMIm]HSO reaches 96.4% and 94.4%, respectively, by multistage extraction. Finally, the used ILs can be reused by vacuum drying, and their desulfurization rates are not significantly decreased after recycling 7 times in single-stage desulfurization.

关键词： br?nsted ionic liquids model gasoline thiophene extraction density functional theory

HTML PDF 收藏

of doping and steam treatment on the catalytic activities of nano-scale H-ZSM-5 in the methanol to gasoline

Baodong Song, Yongqiang Li, Gang Cao, Zhenhai Sun, Xu Han

《化学科学与工程前沿（英文）》 2017年第11卷第4期页码 564-574 doi: 10.1007/s11705-017-1654-y

摘要： In the transformation of methanol to gasoline (MTG), the selectivity to gasoline and the aromatic content in the produced gasoline are important factors. The catalytic activities of steam-treated and non-steam-treated nano-scale H-ZSM-5 (NHZ5) catalysts impregnated with Ag(I), Zn(II) or P(V) have been investigated in a continuous flow fixed bed reactor. The NH -TPD results showed that after impregnation, the Ag/NHZ5, Zn/NHZ5 and P/NHZ5 catalysts contained comparatively more strong, medium-strong and weak acid sites, respectively. Treatment with steam decreased the number of acid sites in all the catalysts, but the pore volumes in the catalysts were larger which improved carbon deposition resistance resulting in prolonged lifetimes. After 6 h of MTG reaction, the selectivity to gasoline for the steam-treated catalysts, , and were 70.5, 68.4 and 68.7 wt-%, respectively, whereas their respective aromatic contents in the produced gasoline were 61.9, 55.4 and 39.0 wt-%. Thus is the most promising catalyst for MTG applications which can meet the China IV gasoline standard that the amount of aromatics in gasoline should be less than 48 wt-%.

关键词： MTG nano-scale H-ZSM-5 steam treatment gasoline selectivity to gasoline

HTML PDF 收藏

Recovery of free volume in PIM-1 membranes through alcohol vapor treatment

Faiz Almansour, Monica Alberto, Rupesh S. Bhavsar, Xiaolei Fan, Peter M. Budd, Patricia Gorgojo

《化学科学与工程前沿（英文）》 2021年第15卷第4期页码 872-881 doi: 10.1007/s11705-020-2001-2

摘要： Physical aging is currently a major obstacle for the commercialization of PIM-1 membranes for gas separation applications. A well-known approach to reversing physical aging effects of PIM-1 membranes at laboratory scale is soaking them in lower alcohols, such as methanol and ethanol. However, this procedure does not seem applicable at industrial level, and other strategies must be investigated. In this work, a regeneration method with alcohol vapors (ethanol or methanol) was developed to recover permeability of aged PIM-1 membranes, in comparison with the conventional soaking-in-liquid approach. The gas permeability and separation performance, before and post the regeneration methods, were assessed using a binary mixture of CO and CH (1:1, v:v). Our results show that an 8-hour methanol vapor treatment was sufficient to recover the original gas permeability, reaching a CO permeability>7000 barrer.

关键词： polymer of intrinsic microporosity (PIM) PIM-1 physical aging gas separation vapor-phase regeneration

HTML PDF 收藏

Desulfurization mechanism of FCC gasoline: A review

Liang ZHAO, Yan CHEN, Jinsen GAO, Yu CHEN,

《化学科学与工程前沿（英文）》 2010年第4卷第3期页码 314-321 doi: 10.1007/s11705-009-0271-9

摘要： This paper reviews the most important developments on the desulfurization mechanism of Fluid Catalytic Cracking (FCC) gasoline. First, the origin of sulfur compounds in FCC gasoline and the current developed desulfurization approaches and technologies are briefly introduced, and then the researches on desulfurization mechanism are summarized from experimental and theoretical perspectives. Further researches on the desulfurization mechanism will lay a foundation for optimizing desulfurization sorbents and technologies.

关键词： Catalytic Cracking foundation developed desulfurization desulfurization mechanism important

HTML PDF 收藏

Characterization of Bacillus amyloliquefacien contaminating 75% alcohol disinfectant

ZHANG Wanming, YUAN Yuesha, BIAN Cangli, TU Xianyu, ZHANG Wen, HUANG Huqiang, WANG Lan

《医学前沿（英文）》 2008年第2卷第1期页码 113-116 doi: 10.1007/s11684-008-0021-2

摘要： The clinical characterization of Bacillus amyloliquefacien contaminating 75% alcohol disinfectants were studied. The bacteria were cultured and observed by using bacterial examination under the hospital infection monitor. According to the regulations, the resistance of bacterial to physical and chemical factors was tested. Drug sensitivity tests for 20 commonly used medicines were carried out using a K-B method. The bacterial plasmids were analyzed using the Birnboim method. The bacteria were found after being cultured in the clinically-used 75% alcohol disinfectant fluid. Their total number was more than 800 cfu/mL and they were identified as Bacillus amyloliquefacien. The bacteria were also found to be resistant to boiling for 5 min. It grew well in 95% alcohol disinfectant and was insensitive to 84 disinfectant fluids containing chlorine (1000 mg/L) and such disinfectants as ozone. They were able to be sterilized better through routine ultraviolet exposure for 30 min or gas pressure. The bacteria contained a 2.5 kb plasmid and were sensitive to 13 drugs and insensitive to 7 drugs of the 20 drugs tested. It was suggested that alcohol disinfectant fluid was easily contaminated by Bacillus amyloliquefacien, and the bacteria was resistant to disinfectant fluids such as alcohol and 84 disinfectants

HTML PDF 收藏

标题作者时间类型操作

Effects of ambient temperature on regulated gaseous and particulate emissions from gasoline-, E10- and

Rencheng Zhu, Jingnan Hu, Liqiang He, Lei Zu, Xiaofeng Bao, Yitu Lai, Sheng Su

期刊论文

Study on direct alcohol/ether fuel synthesis process in bubble column slurry reactor

Zhen CHEN, Haitao ZHANG, Weiyong YING, Dingye FANG

期刊论文

Molecular diffusion in ternary poly(vinyl alcohol) solutions

期刊论文

Hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol on NiB/SiO2 amorphous alloy catalyst

SONG Yun, LI Wei, ZHANG Minghui, TAO Keyi

期刊论文

Effect of decoction on CD14 expression in lipopolysaccharide signal transduction pathway of alcohol-induced

Rui ZHU MD , Lin SHEN MD , Jianguo LIU MD , Weili ZHANG MM , Ling YANG MD ,

期刊论文

Using crosslinked polyvinyl alcohol polymer membrane as a separator in the microbial fuel cell

Yanping HOU, Kaiming LI, Haiping LUO, Guangli LIU, Renduo ZHANG, Bangyu QIN, Shanshan CHEN

期刊论文

Online gasoline blending with EPA Complex Model for predicting emissions

Stefan JANAQI, Mériam CHÈBRE, Guillaume PITOLLAT

期刊论文

Degradation of bisphenol A by microorganisms immobilized on polyvinyl alcohol microspheres

Xue BAI, Hanchang SHI, Zhengfang YE, Qiujin SUN, Qing WANG, Zhongyou WANG

期刊论文

Experimental study of stratified lean burn characteristics on a dual injection gasoline engine

Chun XIA, Tingyu ZHAO, Junhua FANG, Lei ZHU, Zhen HUANG

期刊论文

Effects of ancillary ligands in acceptorless benzyl alcohol dehydrogenation mediated by phosphine-free

期刊论文

Study on extraction of thiophene from model gasoline with br?nsted acidic ionic liquids

Xiaomeng WANG, Mingjuan HAN, Hui WAN, Cao YANG, Guofeng GUAN

期刊论文

of doping and steam treatment on the catalytic activities of nano-scale H-ZSM-5 in the methanol to gasoline

Baodong Song, Yongqiang Li, Gang Cao, Zhenhai Sun, Xu Han

期刊论文

Recovery of free volume in PIM-1 membranes through alcohol vapor treatment

Faiz Almansour, Monica Alberto, Rupesh S. Bhavsar, Xiaolei Fan, Peter M. Budd, Patricia Gorgojo

期刊论文

Desulfurization mechanism of FCC gasoline: A review

Liang ZHAO, Yan CHEN, Jinsen GAO, Yu CHEN,

期刊论文

Characterization of Bacillus amyloliquefacien contaminating 75% alcohol disinfectant

ZHANG Wanming, YUAN Yuesha, BIAN Cangli, TU Xianyu, ZHANG Wen, HUANG Huqiang, WANG Lan

期刊论文

京公网安备 11010502051620号京ICP备11030251号-2

关注我们